| 4mm Clear Tempered Glass | |
| Thick | 4mm |
| Edge processing | Seamed Edge, Round edge ,Flat edge |
| Standard | CE EN 12150-2:2004 |
| ANSI Z97.1-2015(R2020) | |
| CAN/CGSB-12.1-2022 | |
| CPSC 16 CFR 1201-2024 | |
| Min Size | 100mm*100mm |
| Max Size | 2000mm*2440mm |
| Port of Loading | Xingang port |
| Package | Plywood Crates,A-Steel Rack etc |
4mm tempered glass is a thinner option in the range of tempered glass, and it can be used in various applications where a lightweight solution is desirable. Here’s an overview of its characteristics, benefits, common applications, and considerations.
Thickness:
Tempering Process:
Safety:
Lightweight:
Cost-Effective:
Versatility:
Aesthetic Features:
Improved Durability:
Display Cases:
Decorative Panels:
Furniture:
Shower Doors:
Mirrors:
Strength Limitations:
Professional Installation:
Custom Cuts:
Thermal Resistance:
4mm tempered glass is a versatile and economical choice where lightweight solutions are needed, such as in display cases and decorative applications. While it provides good safety features due to its tempered nature, its thinner profile limits its use in high-stress environments. If you have specific projects in mind involving 4mm tempered glass, feel free to ask for more information or advice!
One of the thinnest sheets we temper, this 4 mm clear tempered glass behaves like a light panel: a single person can lift it into a frame and adjust it by hand, with no lifting gear on site. It starts as clear float glass and is then heated and rapidly cooled, the step that makes it far stronger than ordinary annealed glass and gives it its habit of breaking into small, blunt fragments instead of sharp shards. Face-on it stays colourless, so displays, shelves and screens keep their own colour and read clean. Shopfitters, display-case and cabinet makers, glazing contractors and interior fit-out teams are the buyers who use it most.
LYD GLASS supplies architectural glass to project and wholesale buyers, covering tempered, laminated, mirror, insulated and decorative glass from one source. Our tempered range runs from 3 mm to 19 mm in clear, ultra-clear low-iron, green and bronze/brown, with seamed, round, flat or polished edges produced to your drawings and sheet sizes up to 3660 mm x 2440 mm. Production follows CE EN 12150-2:2004, ANSI Z97.1-2015(R2020), CAN/CGSB-12.1-2022 and CPSC 16 CFR 1201-2024, and orders ship from Xingang in plywood crates or A-steel racks.
Yes. Your panel drawing stays on file, so a repeat is produced with the same panel sizes and the same edge treatment as the original. Matching an existing installation is easiest when the new pane comes from the same production run and the same drawing. Quote the model reference, LYD-CTG4, and the original panel sizes so the match is exact.
A panel drawing with the finished sizes, the edge profile you want and the position of any holes or cut-outs is enough to start. Our design department turns it into a production drawing and sends it back for your approval before anything is cut. Check that drawing closely, because it becomes the sheet the panel is made from.
Wipe the glass with a soft cloth, warm water and a little mild soap, then dry the pane and the frame around it so water does not stand along the bottom edge. Abrasive pads, scouring powders and ammonia-heavy cleaners can dull or scratch the surface, so keep them well away. Lift panels by the edges in clean gloves rather than sliding them face down across a bench, and store spares upright and separated in a dry place.
Clear float glass from established Chinese makers such as Xinyi Glass, CSG and Jinjing keeps clarity consistent, and we keep to the same source for repeat runs. No tint is added to the sheet, so differences between batches are minimal. If a project mixes these panels with green or bronze glass, the colour difference is intentional and worth planning for.
Yes. Logo marking is available, and the artwork is placed into the panel layout for your approval before production. It is a common request from shopfitting and furniture customers who want their name visible on display fronts. Send the logo file with the panel drawing and say where it should sit.
Where an edge is hidden inside a channel or rebate, a seamed finish is normally enough and keeps fitting simple. For edges that stay visible — shelving, cabinet fronts and screens — a flat edge gives a crisp straight line, while a round edge is softer to the touch and easier to clean. Tell us which edges will be seen and we will match the finish to each one.